MultiMate 250g 1 kg

MultiMate 250g 1 kg Swim

MultiMate is the ultimate all-in-one tablet for efficient pool water care. MultiMate combines fast primary disinfection of the pool water with maintaining high water hygiene. Easy and efficient! MultiMate is almost pH-neutral and stabilized against chlorine degradation from sunlight.

The tablet is divided into 3 phases; pink, white, and blue. The pink part of the tablet consists of fast-dissolving chlorine that shock-disinfects the pool water and ensures thorough disinfection every time a new tablet is added.

The white part of the tablet contains slow-dissolving chlorine with multiple effects. This means that in addition to the disinfecting chlorine, the water slowly receives a combination of the following care products: Flocculant, which collects microscopic floaters into larger units that are easier to catch by the filtration system. pH stabilizer, which makes it easier to maintain a consistent pH level. And liquid hardness stabilizer, which binds the waters metals so that the water is not discolored by substances like copper and iron. At the same time, it prevents scale precipitation and thus prevents scale deposits on pool liners and equipment.

The blue part of the tablet effectively prevents slippery and slimy deposits, thus avoiding an unpleasant slippery and slimy surface on the pool liner, bottom, and equipment.

Dosage: MultiMate is placed directly in the skimmer and dosed with 1 tablet per 20,000 liters of water. A new tablet is added when there is approximately 10% left - usually after about 7 days. Always place the tablets in a floating chlorine dispenser or in the pool skimmer. It is recommended to test chlorine content and pH balance regularly and keep the free chlorine content between 0.5 and 1.0 mg/l. Healthy pool water has a pH value between 7.0 and 7.4. A healthy water balance provides the best effectiveness of water care products. The tablet cannot be used in connection with inline chlorinators or in floating chlorine dispensers. Chlorine and pH values can be easily measured with Swim & Fun test strips.

Be extra careful that the concentration of care products does not become too high in the water around the skimmer during periods when the circulation system is not in operation.

The pool waters content of chlorine stabilizer (cyanuric acid) must not exceed 100 mg/l.

Note that the chlorine consumption can vary depending on the water temperature, how often and how long you swim, and the weather. Make sure that chemicals do not get moist during storage. Store the product upright in its original packaging, out of reach of children, frost-free, and away from direct sunlight.

Healthy pool water has a pH value between 7.0 and 7.4. A healthy water balance provides the best effectiveness of water care products. If the pH value of the pool water is not within this range, it should be adjusted with pH-Plus and pH-Minus, respectively.

Warning: Mixing different chlorine products can cause strong reactions and explosions! Never mix with other chemicals! Biocidal products should be used with caution. Read the label and instructions before using the product.

Number of cartons: 1
Weight (approximately): 1.2 kg